Building construction, Photo report, wood anti-seizure

as we have already told earlier in the preface to the cycle of articles   Construction of a wooden frame house with his own hands

We bought timber in advance. The preliminary drying of the forest lasted from September to April. After that it was possible to begin preparation of timber for installation.

All

wooden houses

must be treated with antiseptics and antipyrea.

This is done to protect against decay and ignition during construction and operation.

How to handle boards most easily?

We used a proven practice method. We open the trench along the length of the boards, the width is chosen according to the convenience (if the board is 150 mm wide, then the 300 mm trench is enough).

At the bottom of the pit is a dense polyethylene film with releases.

After that you can prepare a solution for treatment. We recommend using colored antiseptic, then it's easier to control the careful handling.

For 10 liters of water 1 kg of antiseptic-antipyrene is used. Dissolve it better in warm water. Antiseptic consumption is about 15 liters of solution per 1 m3 of plaque.

We spent 2 days (22 m3) to process the entire forest volume for the house.

After processing the board is placed on an even surface with a transfer and clearances for final drying.

Preparatory work completed. Now you can start the foundation.

Construction of a home for Canadian technology

You can read about the foundation work in the article We make the foundation of a frame house