Romashka 3 (69м²)
- Total area:69 м²
- House dimensions:10.5 м х 8.4 м
- Foundations:Tape monolith reinforced concrete
- Exterior Walls:Aerated concrete block 375 mm
- Overlaps:Wooden joist, No
- Roof:Pitched
- Roofing:Metal tiles
Parameter | data |
---|---|
Soil carrying capacity | |
Foundations | Tape monolith reinforced concrete |
Walls | Aerated concrete block 375 mm |
Roofing | Metal tiles |
Number of floors | 1 |
First floor floor | On the ground |
Ground floor height | 2.7 м |
Overlap of the first floor | Wooden joist |
One-storey house project of 8 x 10 m with two bedrooms and a dining room kitchen.
The Chamomile 3 project is the simplest possible construction of a small three-room one-story house with dimensions of 8.42 x 10.52. The house has a simple rectangular shape. For reasons of economy, the house has one entrance. A porch with dimensions of 1.4 x 1. 9 m was designed in front of the entrance. The roof above the porch is a continuation of the common roof. The house is covered with chotirekhskatnoy roof. Entrance to the attic from inside the house. There are two chimneys on the roof. One from the boiler, another from the kitchen. Exterior finish - decorative plaster. The base is finished with frost-resistant ceramic tiles.
At the entrance there is a small entrance hall that serves as a vestibule. On one side is the utility room or Kotnaya. The boiler room is large enough to accommodate a gas or electric boiler. If necessary, in the boiler room it is possible to arrange a small solid fuel boiler.
On the other side of the hallway is the kitchen. In order to increase the area of the kitchen and get rid of the corridor, a kitchen was designed at the entrance. This made it possible to get a fairly large kitchen with an area of 13.4 m2.
Behind the kitchen wall there is a spacious bathroom with a window. The approach of the bathroom to the kitchen made it possible to combine ventilation pipes and reduce the length of the sewer and water pipes.
Three living rooms ranging from 10 to 17.5 m2 are located in the back of the house.
To access the attic in the hallway is a hatch.
You can see a similar project of a house with a different layout and a gable roof here
The walls of the house are made of gas blocks 375 mm thick. For construction, you will need 38 m3 of aerated concrete. Base tape made of monolithic reinforced concrete. For the construction of the foundation, 28 m3 of concrete is needed. For the roof of floor beams, rafters and other elements, about 12.3 m3 of timber is required.
Foundations are designed for homogeneous, non-sagging soils with a conditional design pressure of 1.5 kg / cm2 on the ground and the absence of groundwater. The freezing depth was adopted at 1,050 m. The construction of foundations must be adjusted according to the results of geological surveys at the construction site.
The project consists of architectural drawings and structural drawings. Architectural drawings include a plan of the house, facades and sections. Drawings of structures consist of a plan of foundations, a plan of a monolithic reinforced concrete belt, lintels, floor beams, roof drawings, as well as units and parts.
The drawing sheets contain detailed material specifications.
Attached to the project are “Outline building intentions” which you will need to obtain a construction passport.
The conceptual intentions include the “Land Development Plan" which indicates the location of the house on your land.
The project of a room house Camomile 3 with an area of 68 is ready for 100 percent.
If necessary, the project will be sent to you by New mail.
E-mail or call and you will receive pre-release information as quickly as possible.
Leave your comment