Dubok 2 (221 м²)
Design of a beautiful two-story house :
- Total area:221 м²
- Total area without garage and basement:221 м²
- House dimensions:12.8 м х 16.9 м
CONSTRUCTION:
- Foundations:Tape prefabricated reinforced concrete
- Exterior Walls:Aerated concrete block 400 mm
- Overlaps:Reinforced concrete panels, Wooden joist
- Roof:Pitched
- Roofing:Bitumen tile
Project price:
957 €
| Parameter | data |
|---|---|
| Soil carrying capacity | 2,6 кг/см2 |
| Foundations | Tape prefabricated reinforced concrete |
| Walls | Aerated concrete block 400 mm |
| Roofing | Bitumen tile |
| Number of floors | 3 |
| Second floor configuration | full |
| First floor floor | Reinforced concrete panels |
| Ground floor height | 2.1 м |
| Height of the second floor | 2.1 м |
| Mansard wall height | 2.7 м |
| Overlap of the first floor | Reinforced concrete panels |
| Overlap of the second floor | Wooden joist |

Design of a beautiful two-story house with four bedrooms, a terrace and a balcony
This is a two-story cottage project with an exquisite design. The rooms of this comfortable house are quite large. On the ground floor there is a spacious study with an area of 17.7 m2, a kitchen of almost 19 m2 and a living room of 34.7 m2. The kitchen and living room can be combined with sliding doors. In the living room, from which there is access to the terrace, a fireplace is designed.
Decoration of the living room and study is a bay window with three windows. On the ground floor there is also an entrance hall with a wardrobe, a bathroom with a sauna and a boiler room. The main entrance from the street to the house, and the boiler room is provided through an unheated vestibule.
On the second floor there are three bedrooms, two bathrooms and a large hall. In the lobby there is the opportunity to put a TV or pool table. Two bedrooms have access to a balcony.
Above the house is an attic which can be used as a living room. Therefore, in the attic there is an opportunity to build a bathroom, and to install roof windows in the roof.
You can see another interesting project of a beautiful two-story house here.
The foundation in this project is a tape monolithic reinforced concrete. The project provides that the foundation foundation is fine sand of medium density. The soil is not wet. Freezing depth 1.1 m. For a relative mark of 0.000, take the clean floor level of the first floor. The construction of foundations must be adjusted according to the results of geological surveys at the construction site. In the event that the foundations of bulk soils are revealed at a depth of laying, they must be selected and replaced with sand laid with a layer-by-layer seal.
External walls are designed from 375mm aerated concrete blocks. The inner walls are made of bricks. Partitions - from aerated concrete. In order to reduce the energy costs of heating, it is recommended that the external walls be clad with 150mm heat-insulating plates. To plaster the external surface of the wall according to the technical conditions. To make the inner wall of brick M100 on a solution of M75 and plaster. The ceilings of the first and second floors are made of reinforced concrete panels. Wooden rafters, coating - metal or bituminous tiles.
It is envisaged to use an electric or gas boiler or heat pump for the heating system and the preparation of hot water. Replacing a gas boiler with a heat pump will give you the opportunity to reduce energy costs for heating and hot water by 4-5 times. In summer, thermal nasos can replace air conditioning. If necessary, we can develop an individual design project for facades and interiors of interior spaces Individual projects of engineering systems can also be developed: heating, sewage, ventilation and power supply. You can read about it on our website in the "Engineering systems" section.
You may like typical house designs - Nord
See projects of semi-detached houses and cottages from AkvilonPro