Air-to-water heat pump price for an 80 m² house

Air-to-water heat pump for an 80 m² house

AkvilonPro can prepare an estimated cost calculation for installing an air-to-water heat pump for house heating and domestic hot water production.

The type and capacity of the heat pump are selected after analyzing the energy performance of the building. If you are not sure whether this system is suitable for your house, we can carry out an energy audit and determine the required equipment capacity.

When is a 6 kW air-to-water heat pump suitable?

A 6 kW air-to-water heat pump may be suitable for a house of about 80 m² if the building is well insulated, the heating system is properly designed and the heat loss is within the required range. The final equipment selection should be based on the heat loss calculation for a specific house.

System specifications

System type: air-to-water.
Heating capacity: 6 kW*.
Electrical power: 2 kW*.
Coefficient of performance: COP 3.
Maximum heating medium temperature: up to 65 °C.
Warranty period: 60 months.
Operation at outdoor temperature: down to -22 °C.
Rated conditions: B0 / W35*.

*The capacity and COP values should be checked against the technical data sheet of the specific heat pump model.

Estimated turnkey price of a 6 kW air-to-water heat pump

The estimated turnkey cost of installing a 6 kW air-to-water heat pump includes the price of the equipment, materials for the boiler room connection, installation work, commissioning, transport and overhead costs.

Item	Cost, euro
Air-to-water heat pump, Sweden	5 645
Materials for boiler room piping: pipes, valves, fittings, expansion vessels, safety group, drainage and condenser*	692
Work including transport, commissioning, start-up, post-start service, filter cleaning, air bleeding, filling the system with heat transfer fluid and consultation in non-standard situations	654
Transport and overhead costs	341
Total:	7 332

What is included in the installation cost?

Energy-efficient heating with a heat pump

The installation cost includes the main materials, installation works and project-based selection of equipment for a specific house.

materials and works for the outdoor unit;
materials and works in the boiler room with the heat pump;
design and calculation works for selecting the heat pump.

What is not included in the price?

The installation cost does not include the house heating system and domestic hot water system. The final cost of installing the heat pump is clarified after a site visit, inspection of the house and completion of design calculations.

Basic installation diagram for an air-to-water heat pump

Air-to-water heat pump connection diagram

The connection diagram for an air-to-water heat pump depends on the heating system, the presence of a buffer tank, domestic hot water cylinder, automation and backup heat source.

Important note about price accuracy

The price shown on this page is an estimate. The final system selection and cost depend on the specific house, its heat loss, heating system type, domestic hot water requirements, installation conditions and the current equipment price.

The equipment warranty is 60 months from the date of heat pump sale.

Conclusion

An air-to-water heat pump for an 80 m² house can be a practical solution for heating and domestic hot water if the equipment capacity matches the actual heat loss of the building. Before ordering, it is important to calculate the heating load, check the heating system and clarify the final configuration.

To compare other equipment options, read our articles and heat pump calculation examples.