- View from above
- Master Plan
|The total area||385 м²|
|Dimensions of the house||30.2 м х 7.9 м|
- foundations:  Tape prefabricated reinforced concrete
- Exterior walls:  Brick 380 mm
- Overlap:  Reinforced concrete panels, Reinforced concrete panels
- Roof:  Inclined roof.
- Roof cladding:  Битумная черепица
Explication of a floor space
|total floor area||191.8|
The second floor
Explication of a floor space
|total floor area||193.8|
|The input data and a description of the design|
|Bearing capacity of soil||1,8 кг/см2|
|Foundation||Tape prefabricated reinforced concrete|
|Walls||Brick 380 mm|
|Number of floors||2|
|The configuration of the second floor|
|type of floor||Precast element|
| || |
|The height of the first floor||3.0 м|
|The height of the second floor||2.7 м|
|The overlap of the first floor||Reinforced concrete panels|
|The overlap of the second floor||Reinforced concrete panels|
Signature of the chief architect of the project certified «wet" stamped project organization.
The plans indicated the location of ventilation and flues.
7 . The plan of the roof.
8 . Drawings of foundations, which include:
• Plan a monolithic pillows,
• schemes designed reinforcement cages for reinforced monolithic pillows,
• Plan the foundations of the walls, above the monolithic pillow,
• sections of foundations, which shows the depth of the foundations,
• specification of materials
• plans showing the locations of the various bridges,
• specification of the jumpers and the name and number of different jumpers.
11 . The drawings of the roof, which include:
• Plan the rafters, with a list of items,
• section of the roof, which are the size of the main elements,
• a list of necessary materials.
These projects laid the materials that are sold in bulk local stores and mass-produced by enterprises of Ukraine
1 . Due to the fact that:
impossible to predict the tastes of each customer,
placement of furniture, which depends on the alignment of sockets switches and fixtures, the selection of specific systems and Santekhpribor heating purely individual,
plumbing and electrical sections of the project carried out at the request of the customer, for an additional charge.
2 . With data of engineering-geological surveys for a fee, we can perform a calculation of foundations.
For more information call - CALL NOW
Example of Project:
title page. He put "wet" seal, signature of the director, the data about where the house is built.
copy of current license approved by the wet stamp and signature of the Director
List of drawings
Explanatory Note. Common data: address site Series № act on the ground, the area (these data can be entered later by the owner), general information about the house.
Explanatory Note. Constructive Solutions, a description of: foundations, walls, ceilings, roofs
Explanatory Note. Engineering part. Description of water supply and sewerage.
Explanatory Note. Elektrika.Protivopozharnye measures. Description of fire protection measures used in the project.
Explanatory Note. Measures for safety, lightning protection.
Explanatory Note. Summary table for the constructive part of the project signed by the chief architect and "wet" seal of
Master Plan area. Site Plan brought forward from the act of land-bound at home.
First floor plan with all dimensions, and notes areas of rooms
Second floor plan with all dimensions, and notes areas of rooms
Four front of the house on the axes.
This sheet shows the number of main wall materials in m3, and a fragment of a fence.
incision along the axis of 1-1 on this page shows the height of the internal elements of the house, and describes the composition of the walls, floors, roofs.
incision along the axis of 2-2 on this page shows the height of the internal elements of the previous sheet from the opposite angle.
plan of the roof. This sheet displays the shape of the roof, main dimensions, area, and mark.
scheme of ventilation and flues. On this page channels appear to connect the boiler and ventilation with elevations and key bindings.
circuit layout of the pads foundation. This sheet displays form the basic foundation pads sections and bindings.
(foundation default is calculated under the good soils with a carrying capacity of> 2 kg/cm2, but in the presence of data exploration can be counted, for a fee, under the soils in your area)
circuit layout of the wall foundations. At this sheet shows the foundations of the wall with the marks of the cross sections, the main size, and a characteristic cut
circuit layout of foundation blocks. On this page reflects the sweep of the layout of blocks from the main PBS marks the heights labeling and binding to the axes. (List is present only in the case prefabricated foundations)
sweep the walls of the porch. In the worksheet shown Scheme layout of blocks under the porch (with precast foundations) or plan to fill foundation under the porch
Sections on foundations. Sections of the foundations in key areas according to the markings on the plane of the bases
Reinforcement of the bases. The scheme of reinforcement of foundations in key areas.
specification of materials on foundations. On this page is the calculation of the basic materials for construction foundation (concrete, reinforcement)
Plan reinforced concrete belts 1st floor. On This sheet is a monolithic concrete plan for laying the belt slabs, the main sections of the specification of fittings and materials belt.
specification of materials reinforced belt
circuit layout of the floor the first floor. In the worksheet displays the layout of hollow core concrete panels and notes.
nodes overlap. Displayed on a sheet of solid nodes overlap areas and the scheme of reinforcement.
specification covering the 1st floor. Displayed on a sheet of sheet material for covering the 1st floor and Notes
Jumpers 1st floor. In the worksheet shown layout of finished bridges over the windows, doorways and specification.
Monolithic Time 2nd floor. In the worksheet, the plan specifies mognolitnogo belt for laying floors on 2nd floor with the specification.
Overlapping 2nd floor. Displayed on a sheet stacking scheme between the joists 2m floor and an attic with the specification.
nodes overlap the 2nd floor. In the worksheet displayed mounts ceiling beams and the main note.
jumpers 2nd floor. In the worksheet displays the layout of finished concrete bridges over the windows and doors on 2nd floor.
Statement jumpers. In the worksheet displays the total bill jumpers
diagram of the elements of the roof. In the worksheet shows the location of the rafters and the roof of the main elements of
nodes of the roof. In the worksheet shows the main parts of the roof mounts with each other
specification elements of the roof. On a sheet of all the materials collected on the roof for the order at the sawmill.
aerated reinforcement scheme. In the worksheet tab shows a diagram of fixtures in the aerated concrete blocks.
sheets are present in the frame house projects:
location stands a wooden frame of the first floor.
Layout of hardwood floor
specification of materials for hardwood floor for the order at the sawmill.
sweep frame for each wall of the house
specification wooden frame for the order at the sawmill.
Features section of the roof and walls of a frame house.